Rodomi 61–72 produktai - viso yra 76
Ultra-compact fall protection device with FS90 ANSI carabiner on anchoring. The Peanut is already equipped with the new One-4-All shock absorber and therefore approved for the weight class 50-135kg. 2.5 m length for use in scaffolding.
ART. NO. H-137-SC-GR EAN 4030281141341 INTERNAT. STANDARD UIAA 121 STANDARD EN 12275-H:2013, EN 362-B:2004 BREAKING LOAD, MAJOR AXIS 22 kN BREAKING LOAD, MINOR AXIS 10 kN BREAKING LOAD, OPEN 7 kN E-CLASS NUMBER 40-02-01-05 MAX. OPENING 30 mm AREA OF APPLICATION Fire brigade / Rescue / Special Forces, Rope Access / Rigging CUSTOMS NO. 76169990 SIZE 112 x 76,5mm WEIGHT 0,08 kg LOCKING SYSTEM Screw MATERIAL Aluminium
The new SPEED ATTACH is a runner of the latest generation that can be attached and detached at any point of a C-profile, but comprises two redundant retention systems as usual. Construction and double locking mechanism also prevent reversed placement or opening under load. A green indicator shows secure locking at any time. Therefore, operating errors are virtually impossible. The runner is suitable for back-pull and drag operation. Solid aluminium housing, stainless steel axles and metal guide rollers ensure low wear. Even after a fall, the runner can still be reconditioned.
Ultra strength nylon webbing Fully enclosed plated D-ring for secure attachment High tensile strength nylon thread Web catch with double stitch for more durable stop Used w/ Tape Trap; creates retrofit tether point Maximum safe working capacity: 2lbs (0.9kg) Third-party certified to a 2:1 safety factor
Approved to the ANSI/ISEA 121-2018 standard Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm) Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information) Intended for singled use, discard after after removal and replace
Requires no heat source for application No adhesives so it can be removed with no mess Fiber glass reinforcement for added durability Provides added grip to the handle of a tool Maximum safe working capacity: 10lbs. (4.5 kg) depending on length, tool, tail and lanyard used Third party tested using a 2:1 safety factor 12ft roll (3.7m) x 1in wide (2.5cm)
Approved to the ANSI/ISEA 121-2018 standard Water resistant main material protects tablets from rain, snow dirt, dust and sand Clear touchscreen material allows for full screen and camera functions Heavy-duty zipper securely holds tablet inside the sleeve Steel grommet ring can be used to easily connect a tool lanyard Tarpaulin reinforced side material for durability Designed to fit tablet without having to remove other aftermarket tablet cases Third party certified to a 2lb. (0.9kg.) maximum capacity Patent pending
Approved to the ANSI/ISEA 121-2018 standard 1000D nylon with water resistant backing Two hook and loop straps secure battery boot to drill battery for safe and easy tethering Nickel-plated cast iron D-Ring Maximum safe working capacity: 6 lbs. (2.7 kg) Third party tested using a 2:1 safety factor Small fits cordless power tool batteries up to: 3.5in L x 2.75in W x 2.5in H (9cm x 7cm x 6.5cm) Large fits cordless power tool batteries up to: 5in L x 3.5in W x 3.5in H (12.5cm x 9cm x 9cm) Patented design
Approved to the ANSI/ISEA 121-2018 standard Stainless steel (#304) material One step retrofit attachment for tethering point Connects around midsection of a waisted or necked tool Secure by adding a drop of adhesive and tightening Maximum safe working capacity: 15lbs (6.8kg) Third-party certified to a 2:1 safety factor
Approved to the ANSI/ISEA 121-2018 standard Stainless-steel bracket with built-in connection point for tool tethering is corrosion-resistant to withstand weathering Patent-pending tool bracket design discretely fastens to open screw port on cordless drills/drivers so you barely notice it’s there Set includes 1 bracket connection point, 6 fasteners with locking washers and 2 product labels Perfect for smaller, cylindrical 12v. drills and impact drivers or other power tools where traditional retrofit attachments are not compatible Ambidextrous design can be flipped to either side of the tool attaching to open screw ports meant for accessory belt clips Fasteners include alloy steel M2.5 (8mm length) socket cap head, 2 stainless-steel M3 (8mm and 12mm lengths) Philips pan heads, and 3 stainless steel M4 (8mm, 10mm, 12mm lengths) Philips pan heads Maximum tethering capacity of 2.5lbs. (1.13kg) for the M2.5 fastener and 3lbs. (1.36kg) for M3 and M4 fasteners
Capacity 140 kg Brand DBI-SALA® Velocity Ship Yes iSafe Equipped No Label Ribbon, Silk Screen Model 9501403 Physical Dimensions 2.20x1.50x2.20 (in) Physical Weight 0.14 kg (0.3lbs) Product Styles Trauma Strap Product Types Full Body Harnesses - Accessory Standards Capital Safety Gen. Mfg. Req.